Page 1 of 1

Altima Coupe Installation

PostPosted: Sun May 23, 2010 3:25 pm
by KPierson
We have successfully installed a slightly modified version of this module in the current generation Altima.

Lock - Purple at BCM
Unlock - green at BCM
Power - White/Blue at BCM
Ground - Black at BCM
RAP - Blue / White
Sunroof Open - Yellow
Sunroof Close - Green

I actually did this installation years ago and never recorded it so please verify all wires.

From memory I never accessed the BCM due to it's location deep in the dash. I believe I tapped the lock and unlock wires in the door boot going to the drivers door. A believe I got the RAP signal in the A Pillar going up to the sunroof switch. You may be able to get power (red / yellow) and ground (black) in the A pillar as well.